Valid Braindumps JN0-683 Questions & PDF JN0-683 VCE

Blog Article

Tags: Valid Braindumps JN0-683 Questions, PDF JN0-683 VCE, JN0-683 Test Question, Training JN0-683 Pdf, JN0-683 New Exam Camp

Moreover, we offer free Juniper JN0-683 Exam Questions updates if the JN0-683 actual test content changes within 12 months of your buying. Our JN0-683 guide questions have helped many people obtain an international certificate. In this industry, our products are in a leading position in all aspects.

Juniper JN0-683 Exam Syllabus Topics:

Topic	Details
Topic 1	Layer 3 Fabrics: This section measures the knowledge of professionals managing IP-based networks in data centers. It covers IP fabric architecture and routing, ensuring candidates understand how the network is structured for scalability and how traffic is routed efficiently.
Topic 2	Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.
Topic 3	Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.

>> Valid Braindumps JN0-683 Questions <<

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q66-Q71):

NEW QUESTION # 66
Exhibit.

You have implemented an EVPN-VXLAN data center. Device served must be able to communicate with device server2.
Referring to the exhibit, which two statements are correct? (Choose two.)

A. Traffic from server1 to server2 will transit a VXLAN tunnel to spinel or spine2. then a VXLAN tunnel from spinel or spine2 to Ieaf2.
B. An IRB Interface must be configured on leaf1 and Ieaf2.
C. Traffic from server! to server2 will transit the VXLAN tunnel between leaf1 and Ieaf2.
D. An IRB interface must be configured on spine1and spine2.

Answer: A,D

NEW QUESTION # 67
Click the Exhibit button.

Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.
Referring to the exhibit, which two configuration changes are required to solve the problem? (Choose two.)

A. Configure the set switch-options vtep-source-interface lo0.0 parameter on Leaf-1.
B. Configure the set switch-options vrf-target target:65000:55 parameter on Leaf-2.
C. Configure the set switch-options service-id 1 parameter on Leaf-2.
D. Configure the set switch-options route-distinguisher 192.168.100.51:2 parameter on Leaf-1.

Answer: A,B

NEW QUESTION # 68
You are adding a server lo a tenant's network within your data center and must limit access to a specific traffic type within the tenant network without pushing all tenant traffic through a firewall.
What will satisfy this requirement?

A. Use a static route in the tenant VRF with a firewall as the next hop for traffic to the new server.
B. Use route leaking with EVPN and a routing policy.
C. Put the new server on a unique subnet within the tenant's network.
D. Use filter-based forwarding.

Answer: D

Explanation:
* Controlling Traffic Within a Tenant's Network:
* The requirement is to limit access to specific traffic types within a tenant's network without routing all tenant traffic through a firewall. This requires a selective method that can direct specific types of traffic to different paths based on the nature of the traffic.
* Filter-Based Forwarding (FBF):
* FBF is a technique that allows for routing decisions based on filters applied to the traffic, such as matching on source IP addresses, destination IP addresses, or even specific application types (like HTTP or FTP). This allows specific types of traffic to be forwardedto a specific next hop (e.g., a firewall) without affecting the entire traffic flow within the tenant's network.
Conclusion:
* Option B:Correct-Filter-based forwarding allows for granular control of traffic, ensuring that only specific types of traffic within the tenant's network are redirected through a firewall, satisfying the requirement.

NEW QUESTION # 69
Exhibit.

Referring to the exhibit, which statement Is true?

A. An OTT architecture is being used.
B. An ERB architecture is being used.
C. A CRB architecture is being used.
D. A PBB-EVPN architecture is being used.

Answer: B

Explanation:
* Understanding Network Architectures:
* ERB (Edge Routed Bridging) architecture involves routing at the network's edge (leaf nodes), while traffic between leaf nodes is switched. This is commonly used in VXLAN-EVPN setups.
* Analysis of the Exhibit:
* The exhibit shows configurations related to routing instances, VXLAN, and VLANs, with VNIs being used for each VLAN. This setup is characteristic of an ERB architecture where each leaf device handles Layer 3 routing for its connected devices.
Conclusion:
* Option B:Correct-The configuration shown corresponds to an ERB architecture where routing occurs at the network's edge (leaf devices).

NEW QUESTION # 70
Exhibit.

Host A is connected to vlan 100 on lead. Host B is connected to vlan 200 on leaf1. Host A and Host B ate unable to communicate. You have reviewed the touting and your hosts have the correct default route (.1) Referring to the exhibit, which two commands will solve the problem? (Choose two.)

A. set interfaces irb unit 100 family inet address 192-168.100.1
B. set vlans vn10013-interface irb.100
C. delete vlans vn200 13-interface irb.200
D. set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10

Answer: B,D

Explanation:
In the provided network configuration, Host A is in VLAN 100 and Host B is in VLAN 200. The issue arises because these two hosts are unable to communicate, which indicates that either the interfaces are not properly linked to their respective VLANs, or there is a missing static route required for inter-VLAN routing.
Step-by-Step Analysis:
* VLAN Assignment:
* The exhibit shows that irb.200 is correctly associated with VLAN 200 in the configuration.
However, there is no corresponding irb.100 for VLAN 100. Without irb.100, the network lacks the logical interface to handle routing for VLAN 100. Thus, adding irb.100 to VLAN 100 is necessary.
Command to solve this:
set vlans vn100 13-interface irb.100
* Static Route Configuration:
* For inter-VLAN routing to occur, a static route needs to be configured that allows traffic to pass between different subnets (in this case, between VLAN 100 and VLAN 200). The command set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10 would add a static route that directs all traffic from VLAN 100 to the correct gateway (192.168.200.10), which is necessary to route traffic between the two VLANs.
Command to solve this:
set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10
Explanation of Incorrect Options:
* Option A (delete vlans vn200 13-interface irb.200): This would remove the logical interface associated with VLAN 200, which is not desired because we need VLAN 200 to remain active and properly routed.
* Option B (set interfaces irb unit 100 family inet address 192-168.100.1): This command would incorrectly assign an IP address that does not correspond with the subnet of VLAN 100 (192.168.200.1
/24). This could create a misconfiguration, leading to routing issues.
Data Center References:
For a Data Center, proper VLAN management and static routing are crucial for ensuring that different network segments can communicate effectively, especially when dealing with separated subnets or zones like in different VLANs. This aligns with best practices in DCIM (Data Center InfrastructureManagement) which stress the importance of proper network configuration to avoid downtime and ensure seamless communication between all critical IT infrastructure components.
Ensuring that the correct interfaces are associated with the correct VLANs and having the proper static routes in place are both essential steps in maintaining a robust and reliable data center network.
This detailed analysis reflects best practices as noted in standard data center design and network configuration guides.

NEW QUESTION # 71
......

One of the biggest highlights of the Data Center, Professional (JNCIP-DC) prep torrent is the availability of three versions: PDF, app/online, and software/pc, each with its own advantages: The PDF version of JN0-683 Exam Torrent has a free demo available for download. You can print exam materials out and read it just like you read a paper. The online version of JN0-683 test guide is based on web browser usage design and can be used by any browser device. At the same time, the first time it is opened on the Internet, it can be used offline next time. You can practice anytime, anywhere. The Data Center, Professional (JNCIP-DC) software supports the MS operating system and can simulate the real test environment. The contents of the three versions are the same.

PDF JN0-683 VCE: https://www.torrentvalid.com/JN0-683-valid-braindumps-torrent.html

Report this page

VALID BRAINDUMPS JN0-683 QUESTIONS & PDF JN0-683 VCE

Valid Braindumps JN0-683 Questions & PDF JN0-683 VCE